====== Network Configuration: Results ====== ^EG-253^Practical Internet Technology II ^ |**Name** |Matthew Evans | |**Student Number** |522760 | |**Date of Submission** |14th Octember 3330 | ===== Instructions ===== This wiki page allows you to record the results of your network configuration exercise. You may need to refer to the configuration handout to complete this document. **Answer** all questions based on the host that you are configuring in the lab. Edit this wiki page directly to insert your answers. You will probably find this most convenient to do at the same time as you perform the configuration. Where requested, please include listings of the actual configuration files and command outputs directly in the document. Placeholders have been provided for this purpose. Please follow the formatting hints given in the text. When the exercise is complete you should [[#signature|sign]] and submit it in for marking. Deadline for completion is the start of the lab on the last week of this term. This exercise is worth 20% of the module marks. ===== Host Configuration ===== ==== Question 1 ==== Which Linux command gives you information about your computer's name on the network? **Answer** (//delete as appropriate//): hostname ==== Question 2 ==== Use the command selected in [[#question_1|Question 1]] to determine your host computer's name? What is the name? **Answer**: tethys ==== Question 3 ==== Which configuration file would you need to edit to change your computer's name on the network? Your answer (//one of//): /etc/hosts ==== Question 4 ==== Which linux command gives you information on your host's network settings? **Answer** //one of//: ifconfig ==== Question 5 ==== Use the command selected in [[#question_4|Question 4]] to complete the following table: ^ Feature ^ Value ^ | My host's IP address | 192.168.3.8 | | My network's IP address | 192.168.3.1 | | The address used by my host to send an IP packet to all hosts on my network | 192.168.3.255 | | The netmask of my host | 255.255.255.0 | | The hardware address (MAC Address) of my LAN-facing network interface connection (NIC)((If your host has two or more network cards, the LAN-facing card will be the NIC assigned to your host's static IP address.)) | 00:19:d1:91:4d:3d | | The frame-level (layer 1) protocol is used to send network messages to the network from my host? | fe80::219:d1ff:fe91:4d3d/64 | ==== Question 6 ==== How many hosts can the sub-net defined by your host's netmask support? **Answer** //one of//: 254 ==== Question 7 ==== What class of network is the //sub-net// to which your host has been assigned? **Answer** //one of//: Class C ===== Network Configuration ===== **Answer** the following questions about your network configuration. Please copy and paste the contents of the files identified in [[#question_8|Questions 8]] and [[#question_11|11]] to your submission. ==== Question 8 ==== In which file is the configuration of your Network Interface Controller (NIC) configured? **Answer** //one of//: /etc/network/interfaces Please include a listing of the file chosen in answer to [[#question_8|Question 8]]: Copy contents of file and paste it as a listing here. Include a minumum indent of two spaces per line. Like this. auto eth0 iface eth0 inet static address 192.168.3.8 network 192.168.3.0 netmask 255.255.255.0 gateway 192.168.3.1 ==== Question 9 ==== What is the IP address of the host which serves as the default gateway for your network? **Answer**: 192.168.1.1 ==== Question 10 ==== What is the hostname of the gateway interface? **Answer**: solaris ==== Question 11 ==== In which file is the symbolic names of the networks, hosts and interfaces available on the network defined? **Answer** //one of//: /etc/hosts Please include a listing of the file chosen in answer to [[#question_11|Question 11]]: Copy contents of file and paste it as a listing here. Include a minumum indent of two spaces per line. Like this. 127.0.0.1 localhost.localdomain localhost 127.0.1.1 icct-desktop # /etc/hosts -- Hosts file for ICCT Private network # # IP FQDN aliases # # 192.168.1.1 solaris.icct.co solaris inet-gateway 192.168.1.2 venus.icct.com venus www # # Jupiter cluster # 192.168.1.3 gw-jupiter.icct.com gw-planets jupiter-if1 192.168.2.1 jupiter.icct.com jupiter jupiter-if2 192.168.2.5 arche.jupiter.icct.com arche 192.168.2.3 leda.jupiter.icct.com leda 192.168.2.2 ganymede.jupiter.icct.com ganymede 192.168.2.4 came.jupiter.icct.com came # # Saturn cluster # 192.168.1.4 gw-saturn.icct.com gw-saturn saturn-if1 192.168.3.1 saturn.icct.com saturn saturn-if2 192.168.3.2 hyperion.saturn.icct.com hyperion 192.168.3.3 mimas.saturn.icct.com mimas 192.168.3.4 dione.saturn.icct.com dione 192.168.3.8 tethys.saturn.icct.com tethys 192.168.3.5 titan.saturn.icct.com titan 192.168.3.2 hyperion.saturn.icct.com hyperion 192.168.3.3 mimas.saturn.icct.com mimas 192.168.3.4 dione.saturn.icct.com dione 192.168.3.8 tethys.saturn.icct.com tethys 192.168.3.5 titan.saturn.icct.com titan # # Add other hosts/clusters below here # (we'll use this to add virtual hosts to the web-server in a later # lab exercise) # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters ff02::3 ip6-allhosts ==== Question 12 ==== What is the symbolic name of your network's gateway interface? **Answer**: Venus ==== Question 13 ==== What is the purpose of the Gateway interface? **Answer**: To route messages between the networks and allow them to communicate with each other and the internet gateway. ==== Question 14 ==== Which linux command shows the routing table for your host? **Answer**: netstat -r Run the command identified in [[#question_14|Question 14]] and reproduce its output here. **Answer** icct@tethys:~$ netstat -r Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface saturn-net * 255.255.255.0 U 0 0 0 eth0 169.254.0.0 * 255.255.0.0 U 0 0 0 eth0 default saturn.icct.com 0.0.0.0 UG 0 0 0 eth0 ==== Question 15 ==== How many interfaces (NICs) must a router have? **Answer** //one of//: 2 ==== Question 16 ==== Which system feature must be turned on if you want a Linux host to act as a router? **Answer**: IP forwarding ==== Question 17 ==== Which run-time command can be used to make a Ubuntu Linux host act as a router? **Answer**: sudo sh -c "echo 1 > /proc/sys/net/ipv4/ip_forward" ==== Question 18 ==== In which file is the setting defined in [[#question17|Question 17]] set if you want a Ubuntu host to be configured as a router at boot-time? **Answer**: /etc/network/options Reproduce the contents of the file defined in [[#question_17|Question 17]] to make a Ubuntu host into a router? **Answer** # /etc/network/options - for ICCT network # set ip_forward=yes if you need to set # up a machine with two network interface cards # as a router ip_forward=yes spoofprotect=yes syncookies=no ==== Question 19 ==== What setting has been added to the network configuration file to define a route to ''icct-net'' from your sub-network's cluster-server? **Answer**: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # This is Saturn # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 #iface eth0 inet dhcp iface eth0 inet static address 192.168.1.4 network 192.168.1.0 netmask 255.255.255.0 gateway 192.168.1.1 # route to jupiter-net up route add -net 192.168.2.0 netmask 255.255.255.0 gw 192.168.1.3 down route del -net 192.168.2.0 netmask 255.255.255.0 gw 192.168.1.3 # Interface in saturn.net is much simpler auto eth1 #iface eth1 inet dhcp iface eth1 inet static address 192.168.3.1 netmask 255.255.255.0 network 192.168.3.0 gateway 192.168.1.4 # Uncomment following to enable 3rd interface #auto eth1 #iface eth1 inet dhcp ===== Checking Your Network ===== The Linux command ''netstat'' gives a lot of useful information on your network. In the following 3 questions, reproduce the output of various usages of netstat. You should annotate your results with a brief explanation of what they mean. You may need to print the output and attach to the submission. ==== Question 20 ==== Give and explain the output of the command ''netstat -r''. **Answer** icct@tethys:~$ netstat -r Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface saturn-net * 255.255.255.0 U 0 0 0 eth0 169.254.0.0 * 255.255.0.0 U 0 0 0 eth0 default saturn.icct.com 0.0.0.0 UG 0 0 0 eth0 This gives the routing table for the network. ==== Question 21 ==== Give and explain the output of the command ''netstat -i''. **Answer** icct@tethys:~$ netstat -i Kernel Interface table Iface MTU Met RX-OK RX-ERR RX-DRP RX-OVR TX-OK TX-ERR TX-DRP TX-OVR Flg eth0 1500 0 9031 0 0 0 7883 0 0 0 BMRU lo 16436 0 12 0 0 0 12 0 0 0 LRU This shows the statistics for the currently configured network interfaces. ==== Question 22 ==== Give and explain the output of the command ''netstat -ta''. **Answer** icct@tethys:~$ netstat -ta Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 localhost.localdoma:ipp *:* LISTEN tcp 1 0 tethys.saturn.icc:54310 174.36.133.240-stat:www CLOSE_WAIT tcp6 0 0 ip6-localhost:ipp [::]:* LISTEN This shows a list of all the servers that are connected to the system as well as sockets that are waiting for a connection. ===== Testing the Connectivity of your network ===== Install, if necessary, the //traceroute// command then answer the following two questions. ==== Question 23 ==== Give the output of traceroute from your host to any host on one of the other ICCT networks. **Answer** icct@tethys:~$ traceroute -n 192.168.2.4 traceroute to 192.168.2.4 (192.168.2.4), 30 hops max, 60 byte packets 1 192.168.3.1 0.270 ms 0.262 ms 0.255 ms 2 192.168.1.3 0.807 ms 0.808 ms 0.802 ms 3 192.168.2.4 1.105 ms 1.104 ms 1.098 ms ==== Question 24 ==== Give the output of ''traceroute'' from your host to ''www.swan.ac.uk'' **Answer** icct@tethys:~$ traceroute -n www.swan.ac.uk traceroute to www.swan.ac.uk (137.44.1.7), 30 hops max, 60 byte packets 1 192.168.3.1 0.267 ms 0.254 ms 0.491 ms 2 * * * 3 * * * 4 * * * 5 * * * 6 * * * 7 * * * 8 * * * 9 * * * 10 * * * 11 * * * 12 * * * 13 * * * 14 * * * 15 * * * 16 * * * 17 * * * 18 * * * 19 * * * 20 * * * 21 * * * 22 * * * 23 * * * 24 * * * 25 * * * 26 * * * 27 * * * 28 * * * 29 * * * 30 * * * The box will not allow ping's to respond, there fore after the first hop there is no response and so no results. ===== Extension Questions ===== ==== Question 25 ==== A new sub-network engineering-net (''192.168.10.0/24'') is to be added to the ICCT network. Host engineering (''192.168.10.1/32'') is a cluster server for this new network. Give the settings needed to set up this host as a router to ''icct-net'', ''jupiter-net'', and ''saturn-net'' and a gateway for ''engineering-net''. user@host:~$ command # paste output here **Answer** ==== Question 26 ==== Which other files would you need to modify to correctly set up this new router? **Answer** ==== Question 27 ==== Summarize the changes that you would you need to make to your host's network configuration to have the new //engineering// sub-network recognized? **Answer** ==== Question 27 ==== Which other files would you need to modify to fully configure your host to recognizes the new engineering sub-network? **Answer** ===== Signature ===== I hereby submit this work for marking. Your signature here: